THE WORKERS

State Pride Tour California

When Beckie from Infarrantly Creative asked me to join her State Pride tour, I jumped at the opportunity to represent California! Together with 30 bloggers, representing 30 states, were putting together a blog hop with projects that celebrate each of our states! Im following Stephanie from Somewhat Simple, so if you missed her Arizona project, make sure to check it out!!


Were moving from California to Ohio in two short weeks, so its the perfect time to celebrate our home of the past two years!

When I think about California, I instantly think about sun, sand and water. So I decided to create a gallery wall using our driftwood frames, a cut out of the text, California, and a cabinet door turned into a beach sign.


Heres how we did it!
























For the beach sign, we created a text document to scale in Adobe Illustrator. Then we made a grid (so that the text would line up easily) and printed sections on 8.5 x 11 paper. We shifted the text on the printable space until the entire document was printed. Any print shop, such as staples or Fed Ex office would be able to print large scale if youd like to skip the printing and taping step.



Then taped it to a large sheet of cardboard and taped transparent contact paper overtop and cut out with an xacto knife.


We primed and painted a large cabinet door.


Once dry, we removed the backing and placed the contact paper on the cabinet door, pressing down all of the edges.

























Then using white spray paint directly above (to avoid it going underneath any loose edges). We sprayed using two thin coats, letting it dry about 30 minutes between coats.


























Letting it dry about 5 to 10 minutes, we took off the contact paper and attached hanging hardware on the back.

and thats it!



For the California cut out, we repeated the first step of the beach sign, printing and taping the text together.


Using spray adhesive, we mounted the printed out to an 1/8" piece of luan.


Drilled holes in the closed areas for the jigsaw blade to enter.


And cut it out with the jigsaw, using a blade designed to cut slowly and minimize splintering.


We primed and spray painted with Rustoleum Lemongrass. Finally, we glued a piece of twine on the back to hang it. I love the simplicity of it!


We paired it with a few of our driftwood frames, made from CA driftwood that we milled, tutorial here


I love the bright colors paired with the beachy wood!